CRAIN GOPHER POLE – brochure
CRAIN GOPHER POLE – schematics
Our one-of-a-kind Gopher Pole is a convenient wire installation tool that is easy to handle in tight spots. It allows you to push/pull wires over long spans, suspended ceilings, sub-floors, crawl spaces, and attics. Sturdy and lightweight, the Gopher Pole is constructed of rigid fiberglass that is safe and non-conductive.
Installation
1. Attach wire to eyelet on exclusive hook/skid tip or to loop in base section.
2. Simply extend each fiberglass section until it stops. Then rotate until snap/lock button locks securely into place.
3. Extend each additional section as needed until tip reaches the point you desire to a maximum of 22 feet.
Extended length 22’
Compact in size (52” Long with a 2” Diameter)
Weighs only four (4) pounds
Gopher Pole has a one-year warranty
Crain’s Gopher Pole is a one-of-a-kind fiberglass, telescopic wire installation tool used by electrical companies, telephone companies, computer companies, alarm installers, and wire installers.
The Gopher Pole:
Telescopes from 4’ to 22’ in a matter of seconds
Easy to handle in tight spots
No loose parts to fit together
Can push/pull wires over long spans, in suspended ceilings, sub-floors, crawl spaces, and attics
Constructed of durable, non-conductive fiberglass
Sturdy and lightweight
Highly visible color (white)
Positive lock system (won’t inadvertently collapse)
The Gopher Pole weighs only four (4) pounds and collapses to 52”. It is also equipped with a hook/skid tip that is used to tie a wire into and push/pull wire over long spans and ceiling grids. The o-ring on the end cap can also push/pull wire.
The Gopher Pole is a six (6) section tool with the #3 section being the smallest and the #8 section being the base (outside) section. The diameter of the #3 section is 11/16” and the diameter of the #8 base section is 1 5/8”.
A carrying case is available separately but does not come with the Gopher Pole.
Replacement Parts
91050 Gopher Pole Complete Lock Set
91051 Gopher Pole Base Cap Assembly
91052 Gopher Pole Hook/Skid Tip
91053 Gopher Pole Tip Button Assembly
91057 Gopher Pole Complete Button Set
96303 Gopher Pole #3 Section
96304 Gopher Pole #4 Section
96305 Gopher Pole #5 Section
96306 Gopher Pole #6 Section
96307 Gopher Pole #7 Section
96308 Gopher Pole #8 Section
CRAIN GOPHER POLE – schematics
Our one-of-a-kind Gopher Pole is a convenient wire installation tool that is easy to handle in tight spots. It allows you to push/pull wires over long spans, suspended ceilings, sub-floors, crawl spaces, and attics. Sturdy and lightweight, the Gopher Pole is constructed of rigid fiberglass that is safe and non-conductive.
Installation
1. Attach wire to eyelet on exclusive hook/skid tip or to loop in base section.
2. Simply extend each fiberglass section until it stops. Then rotate until snap/lock button locks securely into place.
3. Extend each additional section as needed until tip reaches the point you desire to a maximum of 22 feet.
Extended length 22’
Compact in size (52” Long with a 2” Diameter)
Weighs only four (4) pounds
Gopher Pole has a one-year warranty
Crain’s Gopher Pole is a one-of-a-kind fiberglass, telescopic wire installation tool used by electrical companies, telephone companies, computer companies, alarm installers, and wire installers.
The Gopher Pole:
Telescopes from 4’ to 22’ in a matter of seconds
Easy to handle in tight spots
No loose parts to fit together
Can push/pull wires over long spans, in suspended ceilings, sub-floors, crawl spaces, and attics
Constructed of durable, non-conductive fiberglass
Sturdy and lightweight
Highly visible color (white)
Positive lock system (won’t inadvertently collapse)
The Gopher Pole weighs only four (4) pounds and collapses to 52”. It is also equipped with a hook/skid tip that is used to tie a wire into and push/pull wire over long spans and ceiling grids. The o-ring on the end cap can also push/pull wire.
The Gopher Pole is a six (6) section tool with the #3 section being the smallest and the #8 section being the base (outside) section. The diameter of the #3 section is 11/16” and the diameter of the #8 base section is 1 5/8”.
A carrying case is available separately but does not come with the Gopher Pole.
Replacement Parts
91050 Gopher Pole Complete Lock Set
91051 Gopher Pole Base Cap Assembly
91052 Gopher Pole Hook/Skid Tip
91053 Gopher Pole Tip Button Assembly
91057 Gopher Pole Complete Button Set
96303 Gopher Pole #3 Section
96304 Gopher Pole #4 Section
96305 Gopher Pole #5 Section
96306 Gopher Pole #6 Section
96307 Gopher Pole #7 Section
96308 Gopher Pole #8 Section
